Bare Conductor Manufacturer Aluminium The aluminum used
to produce these cables is from first fusion, with a minimum of 99.5%
aluminum ensuring with this purity a high resistance to corrosion. These
cables are suitable in areas with high humidity and in places with high
air pollution. These cables can be supplied greased, using a chemically
stable grease and neutral against aluminum
The range of bare cables for airlines is divided, depending on their use, in: - Phase Conductors - Ground Cables
Bare Conductor
AAC Conductor
AAAC Conductor
ACSR Conductor
AACSR Conductor
ACSR / AW Conductor
TACSR Conductor
ACAR Conductor
ACSS Conductor
ACSS / TW Conductor
ACS Conductor
GSW Conductor
ACCC Conductor
OPGW
These
are mainly made of Aluminum, Aluminum Alloy and Aluminum-Steel cables,
these are replacing hard copper line cables since the last century.
ALL ALUMINUM CONDUCTOR CABLES (AAC)
Bare
Conductor Manufacturer Aluminium These cables are formed by several
aluminum wires in concentric layers wired in opposite directions.
(ACSR)Aluminum-Steel cables arose from the need to reinforce the
aluminum cables by increasing the mechanical characteristics of the
same, improving the coefficient of thermal expansion and ensuring a
longer life of the driver. Since that time these drivers are the most
universally employed in airlines. ACSR cables (Aluminum Conductor Steel
Reinforced) are formed by wires of high purity hard temper aluminum,
placed in concentric layers over a wire core or galvanized steel wire.
COMPACTED
ALUMINUM WIRE REINFORCED with steel core (AWG-MCM) This cable is a
classic seven-wire formed by Circular section Aluminum-Steel, in which
manufacturing process is given him a sectoral shape to the wires of the
outer layer. eliminating the existing gaps. Its main job is in medium
and low voltage lines providing the following advantages: -Decrease in
total diameter for the same effective section with consequent advantages
in terms of wind action, ice sleeves, protection against humidity,
etc. - Advantage to the connection, due to a larger contact surface
Aluminum
coated steel (Alumoweld type) is a bimetallic product with a pure
aluminum coating on a high strength steel core, metallurgically bonded.
The use of this type of wire is came of the conductivity that is higher
than the galvanized steel and guarantees a corrosion resistance similar
to the aluminum wire, so they can be used more safely than the ACSR in
zones of industrial and maritime environments.
ALL ALUMINUM ALLOY CONDUCTOR / ALMELEC (AAAC)
Please Wait...
Almelec
is an aluminum alloy (Magnesium and Silicon) used in conductors for
power lines. The advantage of these cables against ACSR are:
- Cheaper infrastructure due to:
• Longer runs (less supports required) due to lower weight and high breaking load (arrow is less)
• Better reuse of waste because it is a homogeneous cable
- Easy installation
• Greater surface hardness than aluminum (less shock sensitive)
• Better tensile strength
• Less weight, better handling of reels
•
Easy attachment of cable ends Almelec greased cables, both inside and
outside, goes really well in installations near the sea and in areas
with high pollution.